Technical jacket specs
Fabrics
The garment is made of a single-elastic polyamide fabric combined with the innovative Windtex Pu-Vflex ® microporous polyurethane membrane. This solution provideswaterproofing at a pressure of more than 20,000 water columns without compromising the breathability of the garment. In short, even if the weather is uncertain or it has stopped raining, it will not be necessary to remove the shell. With the Tempesta 3L waterproof shell on you will still look great.
In the high-friction areas, we added a fabric with a percentage of Cordura®, also combined with the innovative microporous polyurethane membrane, so that the garment is more resistant to wear and tear.
To top it off, the cuff adjustment is covered with a cut-resistant fabric with a percentage of Kevlar® to give you maximum grip even with wet hands.
Enough? Not by a long shot.
All seams are heat-taped to ensure that not a single drop of water penetrates.
More details
Details also play a key role in ensuring performance and functionality of the garment.
All zippers on the Tempesta 3L waterproof jacket, even the inner and hidden ones, are completely waterproof. We chose the best offered by YKK to ensure that the jacket and pocket openings were comfortable, functional, weather resistant, and in line with the very high standards of waterproofing of the remaining components of the jacket.
The garment features a front pocket with Velcro® closure and anchor rings made of Dyneema®. This material has strong tensile strength, with a tensile strength exceeding 500 kg. You will be able to conveniently and quickly attach and store your most important tools without worrying about ruining your jacket.
The prints of the Tempesta 3L waterproof jacket have high wear and wash resistance. For us it is not enough that years later the jacket is technically functional, it must still be aesthetically perfect. All prints, even the black ones, have a reflective finish to make you visible in the dark.
To top it off, the garment features several adjustment options on the hood, waist, and bottom to better fit your body. Even the cuffs can be adjusted to full closure to allow you to slip your arm underwater!
Main fabric specifications:
Weight: 215 g/m²
Composition: 60% nylon, 25% elastane, 15% polyester (Pu-Vflex microporous membrane)
Water column: ≥ 20,000 mm (EN ISO 20811)
Breathability: ≤ 18 m²Pa/W (ISO 11092)
Air permeability: ≤ 1 mm/sec. (EN ISO 9237)
Spray test: 100 (AATCC – UNI EN 24920)
Technical bibs specs
Fabrics
The garment is made of a single-elastic polyamide fabric combined with the innovative Windtex Pu-Vflex ® microporous polyurethane membrane. This solution provideswaterproofing at a pressure of more than 20,000 water columns without compromising the breathability of the garment. In short, even if the weather is uncertain or it has stopped raining, it will not be necessary to remove the dungarees. With the Tempesta 3L waterproof dungarees on, you’ll still look great.
In the high-friction areas, we added a fabric with a percentage of Cordura®, also combined with the innovative microporous polyurethane membrane, so that the garment is more resistant to wear and tear.
To top it off, the ankle adjustment and gripper pockets are lined with a cut-resistant fabric with a percentage of Kevlar® to give you maximum grip even with wet hands.
Enough? Not by a long shot.
All seams are heat-taped to ensure that not a single drop of water penetrates.
More details
Details also play a key role in ensuring performance and functionality of the garment.
All zippers of the Tempesta 3L waterproof pant are completely waterproof. We chose the best offered by YKK to ensure you a pant opening that was comfortable, functional, weather resistant, and in line with the very high standards of waterproofing of the remaining pant components.
The garment features two rapier pockets lined with cut-resistant fabric. Above these pockets are anchor rings made of Dyneema®. This material has strong tensile strength, with a tensile strength exceeding 500 kg. You will be able to conveniently and quickly store and handle your pliers without worrying about puncturing your pocket or ruining your pants.
The prints on the Tempesta 3L waterproof pant have high wear and wash resistance. For us it is not enough that years later the jacket is technically functional, it must still be aesthetically perfect. All prints, even the black ones, have a reflective finish to make you visible in the dark.
The suspender buckles are made of stainless steel and feature the innovative Fidlock® magnetic closure. Combined with thefull leg opening will allow you to put on and take off the Tempesta 3L waterproof pant in record time.
To top it off, the garment features several adjustment options on the suspenders, waist, and ankles to better fit your body.
Main fabric specifications:
Weight: 215 g/m²
Composition: 60% nylon, 25% elastane, 15% polyester (Pu-Vflex microporous membrane)
Water column: ≥ 20,000 mm (EN ISO 20811)
Breathability: ≤ 18 m²Pa/W (ISO 11092)
Air permeability: ≤ 1 mm/sec. (EN ISO 9237)
Spray test: 100 (AATCC – UNI EN 24920)
Care instructions
Once used, “TEMPESTA” products require no maintenance. If dirty, follow the washing instructions and they will maintain their initial performance for a lifetime!
Payment, shipping and return
This item can be purchased securely with the payment method of your choice.
You will be able to choose in checkout how and when to pay. We accept all credit/debit cards – KLARNA installment payment – bank transfer – payment on delivery – PayPal .
For this item, express shipping is free throughout Italy. You will receive the item in 1/2 business days.
Should you need to make an exchange or return, there is no problem. You have 15 days from the delivery date to send it back to us. Once the condition is verified, we will either exchange or issue a full refund. In case of partial package return, the products not involved in the return will be charged at full price.
You can request it by contacting us or directly from your account.
For full details, visit the Terms and Conditions page.
